水质丁基黄原酸测定难点探讨

丁基黄原酸是水质监测的重要项目之一。水中丁基黄原酸的测定,在样品采集保存、前处理及仪器分析各阶段都存在一定的技术难点。实际分析时很容易出现测定结果不理想,甚至定性定量错误等问题。结合实验对丁基黄原酸测定中容易出现的问题及注意事项进行探讨,正确区分丁基黄原酸及其盐,有效保存样品,采用低损失的前处理方法以及选择性好的分析仪器,有利于提高丁基黄原酸测定的准确性。众多丁基黄原酸测定方法中,液相色谱质谱法、离子色谱法以及液相色谱法在选择性和灵敏度方面更具优势,也可用于其他方法检出丁基黄原酸时对测定进行确认。     

河流型饮用水水源保护区划分比较

比较分析了国内外河流型水源保护区划分的原则、方法和标准,例证了我国不同省份的划分实践。指出,我国各省多采用经验值划分水源保护区范围,部分省份划分方案久未更新,没有充分发挥保护区的作用。提出,应进一步细化水源保护区划分规范指导要求,及时修订省级水源保护区划分方案,并借鉴国外水源保护区划分经验,通过调整水质标准、重视公众参与、利用地理信息系统等方式划分水源保护区,从源头上预防水源污染,降低饮用水公共风险,保障饮用水安全。     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

河流水质自动监测站选址适宜性评价

为建立和量化适于河流水质自动监测站选址的评价方法体系,提出了河流水质自动监测站选址一致性、可行性和适宜性评价问题,并建立了选址可行性和适宜性评价2套指标体系。以自动站选址与手工断面位置不一致为前提,利用累乘指数判断选址可行性,在可行的基础上利用模糊综合评价进一步分析选址的适宜性。应用案例显示,罗汉大桥断面水质自动站选址于手工断面下游150 m处是可行的,并且此选址高度适宜,在具有水质代表性的同时兼顾成本和运维管理需求。     

氨气敏电极法和纳氏试剂分光光度法对地表水中氨氮的比对测试

采用不同质量浓度的氨氮标准样品和实际样品,用氨气敏电极法和纳氏试剂分光光度法进行同步测试。结果表明,2种分析方法在水样氨氮质量浓度在0. 159～2. 81 mg/L范围内具有良好的可比性、精密性和准确性。氨气敏电极法的检出限为0. 03 mg/L,平行6次测定样品的相对标准偏差为0. 4%～4. 2%,加标回收率为85. 0%～110%;纳氏试剂分光光度法的检出限为0. 025 mg/L,平行6次测定样品的相对标准偏差为0. 5%～6. 4%,加标回收率为93. 0%～99. 8%。同时氨气敏电极法在样品预处理、试剂配制和分析时间上要优于纳氏试剂分光光度法。氨气敏电极法能够满足地表水自动监测在线比对实际工作的需求,该方法具有良好的适用性。     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

Biomimicry: How the environment serves as a guide for technological advancements

Multiple ecological tactics, like the ones described here, can be imitated to strongly affect these two components in the construction sector. This article provides an in-depth examination of the literature on biomimicry-based strategies intended to enhance building designs. This analysis is motivated by the rising need for energy legislation to achieve future local goals and provide a framework for use in Panama. These biomimicry-based methods have undergone more review and evaluation, and the incorporation of organism-based design for three of Panama's climate types has been proposed. Therefore, a SWOT analysis assisted in realizing the full potential that biomimicry-based techniques might have in raising the likelihood of satisfying local and international regulatory standards. In order to design constructions using biomimicry, multidisciplinary collaboration is required. This gives a competitive edge for better-trained human resources and expands horizons in the conventional construction industry. Finally, the analysis provided here might act as the preliminary step for the additional technical assessment using numerical and experimental procedures.     

The acceptance of personal protective equipment among Hong Kong construction workers: An integration of technology acceptance model and theory of planned behavior with risk perception and safety climate

Introduction: The phenomenon that construction workers do not use personal protective equipment (PPE) is a major reason for the high occurrence frequency of accidents in the construction industry. However, little efforts have been made to quantitatively examine the factors influencing construction workers’ acceptance of PPE. Method: In the current study, a PPE acceptance model for construction workers (PAMCW) was proposed to address the noted need. The PAMCW incorporates the technology acceptance model, theory of planned behavior, risk perception, and safety climate for explaining construction worker acceptance of PPE. 413 construction workers participated in this study to fill out a structured questionnaire. The PAMCW was analyzed using structural equation modeling. Results: Results provide evidence of the applicability of the technology acceptance model and theory of planned behavior to the PPE acceptance among construction workers. The positive influence of safety climate and risk perception-severity on attitude toward using PPE was significant. Safety climate positively influences perceived usefulness. Risk perception-worry and unsafe was found to positively affect intention to use PPE. Practical Applications: Practical suggestions for increasing construction workers’ use of PPE are also discussed.     

Inhibiting effects by Fe2O3 on combustion and explosion characteristics of ABS resin

The global increase in the use of, and reliance on, plastics has prompted the demand for acrylonitrile-butadiene-styrene (ABS) resin in various fields. With this increased requirement, numerous failures have occurred in the ABS process. Those incidents, resulting from electrostatic discharge, powder accumulation, heat accumulation, construction sparks, and plant fires, have caused dust fire and explosions.In this study, the ABS resin was gleaned from the site and tested for its explosion parameters, including minimum ignition temperature of dust cloud (MIT_C), minimum ignition energy (MIE), and minimum explosion concentration (MEC). To improve loss prevention in the manufacturing process, ferric oxide (Fe₂O₃) as an inert additive was added in the ABS powder. According to the MIE test, Fe₂O₃ has an apparent inhibiting effect on dust explosion for the ABS dust. With the proportion of Fe₂O₃ increased from 25 to 50 mass% in ABS, the MIE increased from 67 to 540 mJ. The explosion tests via 20-L apparatus indicated that Fe₂O₃ mixed with ABS could not increase the MEC significantly. However, the explosion pressure dropped by increasing in the ratio of Fe₂O₃ in ABS. This inerting strategy of ABS was deemed to substantially lessen the probability and severity of fire and explosion.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.